可能感兴趣的商品
-
品牌：Microchip Atmel
类别：SAM3系列单片机
-
品牌：Microchip Atmel
类别：SAM3系列单片机
-
品牌：Microchip Atmel
类别：SAM3系列单片机
-
品牌：Microchip Atmel
类别：SAM3系列单片机
-
品牌：Microchip Atmel
类别：SAM3系列单片机
ATSAM3S8C
- 品牌：Microchip Atmel
- 包装：--
- 无铅情况/ROHS: --
- 经营商：科通芯城自营
- 描述： Cortex-M3 Microcontroller with 512KB Flash, USB, 100 Pins
- 封装：--
- 类别：SAM3系列单片机
| 参数 | 数值 |
|---|---|
| Calibrated RC Oscillator | Yes |
| Output Compare channels | 6 |
| Analog Comparators | 1 |
| SD / eMMC | 1 |
| 32kHz RTC | Yes |
| Max. Operating Frequency | 64 MHz |
| USB Speed | Full Speed |
| Flash (Kbytes) | 512 Kbytes |
| TWI (I2C) | 2 |
| SRAM (Kbytes) | 64 |
| CPU | Cortex-M3 |
| DAC Resolution (bits) | 12 |
| Pin Count | 100 |
| Operating Voltage (Vcc) | 1.62 to 3.6 |
| Temp. Range (deg C) | -40 to +85 |
| PWM Channels | 4 |
| SSC | 1 |
| DAC Channels | 2 |
| Quadrature Decoder Channels | 1 |
| ADC Speed (ksps) | 1000 |
| Ext Interrupts | 79 |
| Self Program Memory | YES |
| I/O Supply Class | 1.8/3.3 |
| ADC channels | 16 |
| # of Touch Channels | 32 |
| USB Interface | Device |
| NAND Interface | Yes |
| Temp. Sensor | Yes |
| SPI | 3 |
| USB Transceiver | 1 |
| Max I/O Pins | 79 |
| Timers | 6 |
| ADC Resolution (bits) | 12 |
| MPU / MMU | Yes / No |
| External Bus Interface | 1 |
| Input Capture Channels | 6 |
| UART | 4 |
A member of the Atmel® SAM3S series microcontrollers based on the high-performance 32-bit ARM® Cortex™-M3 RISC processor. It operates at a maximum speed of 64MHz and features 512KB of flash and 64KB of SRAM. The extensive peripheral set includes a FS USB device port with embedded transceiver, a HS multimedia card interface for SDIO/SD/MMC, two USARTs, two UARTs, two TWIs, three SPsI, I2S, PWM timer, six 16-bit timers, RTC, eleven 12-bit ADCs, two 12-bit DACs and an analog comparator. TThe QTouch® library offers an easy way to implement buttons, wheels and sliders. The parallel data capture mode on the PIOs collects data from external devices not compliant with standard memory read protocols, such as low-cost image sensors. The data is then transferred to memory by DMA offloading the CPU. The device operates from 1.62V to 3.6V and is available in 100-pin QFP and BGA packages.
