可能感兴趣的商品
-
品牌：Microchip Atmel
类别：SAM3系列单片机
-
品牌：Microchip Atmel
类别：SAM3系列单片机
-
品牌：Microchip Atmel
类别：SAM3系列单片机
-
品牌：Microchip Atmel
类别：SAM3系列单片机
-
品牌：Microchip Atmel
类别：SAM3系列单片机
ATSAM3S1AA-AU
- 品牌：Microchip Atmel
- 包装：--
- 无铅情况/ROHS: --
- 经营商：科通芯城自营
- 描述：Cortex-M3 Microcontroller with 64KB Flash, USB, 48 Pins
- 封装：LQFP R-LQ048_E 48
- 类别：SAM3系列单片机
| 参数 | 数值 |
|---|---|
| USB Transceiver | 1 |
| FPU | No |
| Crypto Engine | No |
| SPI | 2 |
| Ext Interrupts | 34 |
| Self Program Memory | YES |
| Timers | 3 |
| I/O Supply Class | 1.8/3.3 |
| Video Decoder | No |
| USB Interface | Device |
| Temp. Sensor | Yes |
| ADC Speed (ksps) | 1000 |
| External Bus Interface | 0 |
| Input Capture Channels | 3 |
| DAC Resolution (bits) | 0 |
| UART | 3 |
| Output Compare channels | 3 |
| Analog Comparators | 1 |
| picoPower | No |
| EEPROM (Bytes) | 0 |
| ADC Resolution (bits) | 12 |
| # of Touch Channels | 17 |
| MPU / MMU | Yes / No |
| Max I/O Pins | 34 |
| CPU | Cortex-M3 |
| Temp. Range (deg C) | -40 to 85 |
| 32kHz RTC | Yes |
| Max. Operating Frequency | 64 MHz |
| USB Speed | Full Speed |
| ADC channels | 8 |
| TWI (I2C) | 2 |
| DRAM Memory | No |
| SRAM (Kbytes) | 16 |
| Calibrated RC Oscillator | Yes |
| Resistive Touch Screen | No |
| Hardware QTouch Acquisition | No |
| Pin Count | 48 |
| Operating Voltage (Vcc) | 1.62 to 3.6 |
| PWM Channels | 4 |
| Camera Interface | No |
| Graphic LCD | No |
| SSC | 1 |
| Flash (Kbytes) | 64 Kbytes |
| Quadrature Decoder Channels | 1 |
| NAND Interface | Yes |
A member of the Atmel® SAM3S series microcontrollers based on the high-performance 32-bit ARM® Cortex™-M3 RISC processor. It operates at a maximum speed of 64MHz and features 64KB of flash and 16KB of SRAM. The extensive peripheral set includes a FS USB device port with embedded transceiver, USART, two UARTs, two TWIs, two SPIs, I2S, PWM timer, three 16-bit timers, RTC, eight 12-bit ADCs and an analog comparator. The QTouch® library offers an easy way to implement buttons, wheels and sliders. The parallel data capture mode on the PIOs collects data from external devices not compliant with standard memory read protocols, such as low-cost image sensors. The data is then transferred to memory by DMA offloading the CPU. The device operates from 1.62V to 3.6V, is available in 48-pin QFP and QFN packages, and is pin-to-pin compatible with the SAM3N1A.
